Pneumatic Duct Folder

When buying a Pneumatic Duct Folder for duct making, here are some things you might want to consider:

1. Usage: Cleat Folders are used for making HVAC sheet metal ductwork. Slip and Drive Duct is the most common method of connecting two assembled rectangular duct sections from end to end.
2. Types: There are powered cleat benders and manual cleat benders. The powered ones can be electric or pneumatic.
3. Hybrid Cleatfolder: The Flagler hybrid cleatfolder takes advantage of the best parts of the electric and the best parts of the pneumatic powered cleatfolders. The clamping table is pneumatic which gives a stronger holding power when clamping the metal.
4. Specifications: For example, the Flagler Hybrid electric/pneumatic Cleatfolder has a cleat edge of 7/16″ – 1/2″ (20 ga. max), a cycle time of 1.7 seconds, and a max forming width of 30″ wide; 36″ wide.
5. Design: It has an open throat design, a bending motor of 2 HP 230/3/60 gearmotor w/ overload shear pin, and a pneumatic 90 psi clamping table.
6. Dimensions and Weight: For example, Model HYC-30: 27″ W x 60″ L X 46″H and weighs 1,050 LBS; Model HYC-36: 27” W x 66” L X 46″H and weighs 1,150 LBS.

Remember to consider your specific needs and requirements when choosing a Pneumatic Duct Folder.