Pemotongan Laser Serat vs Pemotongan Laser CO2: Mana yang Lebih Baik?
Dalam dunia pemotongan laser, ada dua raksasa yang menonjol: laser serat dan laser CO2. Artikel ini membahas tentang kuncinya...
Saya yakin Anda pasti pernah memiliki mesin pemotongan laser, dan Anda pasti pernah mengalami masalah pemotongan dalam proses pemotongan, seperti tidak bisa memotong, ada gerinda, permukaan pemotongan yang tidak mulus, dll.
Di satu sisi, masalah ini terkait dengan daya laser (lihat artikel ini untuk cara memilih daya mesin pemotongan laser), di sisi lain, keduanya terkait dengan kecepatan pemotongan.
Sebenarnya, pertanyaan tentang cara menghitung kecepatan pemotongan laser adalah pertanyaan lama. Sebagian besar operator dengan mesin pemotongan laser akan menemukan jawaban untuk pertanyaan ini.
Dalam artikel ini, kami menunjukkan kepada Anda, ketebalan pemotongan maksimum dan kecepatan pemotongan yang sesuai IPG Laser serat 1000-15000W dalam bentuk tabel. Tentu saja, semua data berikut ini adalah untuk pemotongan logam serat logam, seperti baja karbon, baja tahan karat, aluminium, tembaga, dll. Untuk CO2 non-logam grafik kecepatan potongseperti akrilik dan kulit, Anda dapat merujuk ke artikel ini.
Selain itu, jika laser Anda bukan merek IPG (banyak produsen mesin pemotong laser akan menggunakan merek lain, seperti Amada, TRUMPF dan Mitsubishi), tabel berikut ini dapat digunakan sebagai referensi, tetapi Anda dapat mengurangi nilainya secara tepat ketika menyesuaikan parameter mesin sampai Anda menemukan kecepatan pemotongan laser yang paling sesuai.
Jika Anda ingin mengetahui cara memilih kekuatan mesin pemotong laser serat, Anda dapat baca postingan ini.
I. Grafik Ketebalan & Kecepatan Pemotongan Laser Serat berdasarkan Bahan
1. Grafik Ketebalan & Kecepatan Pemotongan Laser Serat (Baja Ringan)
| Ketebalan (mm) | IPG 1000W | IPG 1500W | IPG 2000W | IPG 3000W | IPG 4000W |
|---|---|---|---|---|---|
| Kecepatan | Kecepatan | Kecepatan | Kecepatan | Kecepatan | |
| (m/menit) | (m/menit) | (m/menit) | (m/menit) | (m/menit) | |
| 1 | 15.0-22.0 | 18.0-25.0 | 25.0-33.0 | 28.0-38.0 | 30.0-44.0 |
| 2 | 5.0-6.6 | 7.0-10 | 7.0-10 | 5.5-7.0 | 5.5-7.7 |
| 3 | 2.5-3.85 | 4.0-5.5 | 4.0-5.5 | 3.6-5 | 3.7-5.5 |
| 4 | 2.0-3.3 | 2.5-3.5 | 2.8-4.0 | 3.0-4.5 | 3.5-4.62 |
| 5 | 1.4-2.0 | 2.0-2.8 | 2.0-2.75 | 2.5-3.3 | 2.5-4.0 |
| 6 | 1.2-1.65 | 2.0-2.42 | 2.0-2.42 | 2.3-2.86 | 2.5-3.52 |
| 8 | 0.9-1.32 | 1.2-1.65 | 1.2-1.65 | 1.8-2.2 | 2.0-2.8 |
| 10 | 0.6-0.9 | 1.0-1.32 | 1.0-1.32 | 1.21-1.65 | 1.2-2.2 |
| 12 | 0.4-0.7 | 0.7-1.0 | 0.7-1.0 | 1.0-1.32 | 1.0-1.76 |
| 16 | 0.6-0.8 | 0.6-0.8 | 0.6-0.9 | 0.7-1.0 | |
| 20 | 0.5-0.8 | 0.6-0.9 | |||
| 22 | 0.66-0.9 |
| Ketebalan (mm) | IPG 6000W | IPG 8000W | IPG 10000W | IPG 12000W | IPG 15000W |
|---|---|---|---|---|---|
| Kecepatan | Kecepatan | Kecepatan | Kecepatan | Kecepatan | |
| (m/menit) | (m/menit) | (m/menit) | (m/menit) | (m/menit) | |
| 1 | 35.0-48.0 | 60.0-70.0 | 65.0-75.0 | 66.0-80.0 | 70.0-90.0 |
| 2 | 6.0-8.25 | 6.8-7.2 | 7.0-7.5 | 7.2-7.8 | 7.5-8.2 |
| 3 | 4.0-5.5 | 4.7-5.3 | 5.0-5.5 | 5.2-5.8 | 5.5-6.0 |
| 4 | 3.5-5.0 | 3.8-4.3 | 4.0-4.5 | 4.2-4.6 | 4.5-5.2 |
| 5 | 3.0-4.2 | 3.3-3.8 | 3.6-4.0 | 3.8-4.2 | 4.0-4.5 |
| 6 | 2.6-3.52 | 3.0-3.4 | 3.3-3.7 | 3.5-4.0 | 3.8-4.3 |
| 8 | 2.0-2.8 | 2.3-2.6 | 2.5-2.8 | 2.6-3.0 | 2.8-3.5 |
| 10 | 1.8-2.3 | 2.0-2.5 | 2.3-2.6 | 2.5-3.0 | 2.6-3.0 |
| 12 | 1.6-2.1 | 1.7-2.2 | 1.9-2.2 | 2.0-2.3 | 2.5-3.0 |
| 16 | 0.7-1.0 | 1.2-1.4 | 1.3-1.5 | 1.4-1.6 | 1.7-2.0 |
| 20 | 0.65-0.95 | 1.0-1.1 | 1.1-1.2 | 1.1-1.4 | 1.3-1.5 |
| 22 | 0.6-0.77 | 0.9-1.0 | 0.9-1.0 | 0.9-1.2 | 1.1-1.3 |
| 25 | 0.4-0.65 | 0.6-0.7 | 0.6-0.7 | 0.6-0.8 | 0.9-1.2 |
| 30 | 0.6-0.8 |
2. Grafik Ketebalan & Kecepatan Pemotongan Laser Serat (Baja Tahan Karat)
| Ketebalan (mm) | IPG 1000W | IPG 1500W | IPG 2000W | IPG 3000W | IPG 4000W |
|---|---|---|---|---|---|
| Kecepatan | Kecepatan | Kecepatan | Kecepatan | Kecepatan | |
| (m/menit) | (m/menit) | (m/menit) | (m/menit) | (m/menit) | |
| 1 | 16.5-22.0 | 20.0-26.0 | 27.5-33.0 | 31.0-38.5 | 33.0-45.0 |
| 2 | 4.5-6.1 | 18.0-22.0 | 18.0-22.0 | 10.0-16.5 | 10.0-20.0 |
| 3 | 2.0-3.1 | 4.5-5.5 | 4.5-5.5 | 7.0-10 | 7.5-12.0 |
| 4 | 1.0-1.65 | 2.0-2.5 | 2.2-2.8 | 5.0-7.2 | 5.5-9.0 |
| 5 | 0.4-0.7 | 1.5-2.0 | 1.5-2.0 | 1.8-2.45 | 4.0-5.5 |
| 6 | 0.2-0.45 | 0.7-3.1 | 0.7-1.32 | 1.0-1.65 | 2.6-4.5 |
| 8 | 0.2-0.45 | 0.35-0.6 | 1.2-2.0 | 1.6-2.8 | |
| 10 | 0.7-1.0 | 0.7-1.65 | |||
| 12 | 0.5-0.9 |
| Ketebalan (mm) | IPG 6000W | IPG 8000W | IPG 10000W | IPG 12000W | IPG 15000W |
|---|---|---|---|---|---|
| Kecepatan | Kecepatan | Kecepatan | Kecepatan | Kecepatan | |
| (m/menit) | (m/menit) | (m/menit) | (m/menit) | (m/menit) | |
| 1 | 50.0-65.0 | 63.0-66.0 | 68.0-72.0 | 70.0-80.0 | 75.0-90.0 |
| 2 | 30.0-40.0 | 40.0-44.0 | 42.0-46.0 | 44.0-48.0 | 46.0-50.0 |
| 3 | 18.0-25.0 | 25.0-28.0 | 27.0-30.0 | 28.0-35.0 | 30.0-38.0 |
| 4 | 10.0-15.5 | 15.0-18.0 | 18.0-21.0 | 20.0-26.0 | 22.0-28.0 |
| 5 | 8.0-13.5 | 12.0-14.0 | 14.0-16.0 | 15.0-20.0 | 16.0-22.0 |
| 6 | 6.0-9.0 | 9.0-9.5 | 10.0-10.5 | 11.0-13.0 | 12.0-15.0 |
| 8 | 4.0-5.5 | 5.0-5.3 | 6.5-6.8 | 7.0-7.5 | 7.5-8.5 |
| 10 | 1.8-2.8 | 3.8-4.0 | 4.7-5.0 | 5.0-5.5 | 5.5-6.5 |
| 12 | 1.2-1.65 | 2.5-2.7 | 2.8-3.0 | 3.0-3.5 | 3.3-4.0 |
| 16 | 0.8-1.2 | 1.8-1.9 | 2.2-2.4 | 2.3-2.8 | 2.5-3.0 |
| 20 | 0.6-0.9 | 1.3-1.5 | 2.0-2.2 | 2.1-2.5 | 2.3-2.8 |
| 22 | 0.7-0.8 | 1.2-1.3 | 1.4-1.7 | 1.5-1.9 | |
| 25 | 0.5-0.6 | 0.7-0.8 | 0.7-1.0 | 0.9-1.2 | |
| 30 | 0.5 | 0.5-0.7 | 0.6-0.8 | ||
| 35 | 0.4-0.5 | 0.5 | |||
| 40 | 0.3 | 0.3 | |||
| 45 | 0.3 |
3. Grafik Ketebalan & Kecepatan Pemotongan Laser Serat (Aluminium)
| Ketebalan (mm) | IPG 1000W | IPG 1500W | IPG 2000W | IPG 3000W | IPG 4000W |
|---|---|---|---|---|---|
| Kecepatan | Kecepatan | Kecepatan | Kecepatan | Kecepatan | |
| (m/menit) | (m/menit) | (m/menit) | (m/menit) | (m/menit) | |
| 1 | 10.0-13.2 | 15.0-27.5 | 25.0-31.0 | 25.0-40.0 | 26.0-44.0 |
| 2 | 2.0-4.5 | 7.0-8.6 | 10.0-13.2 | 10.0-20.0 | 10.0-22.0 |
| 3 | 0.6-1.32 | 5.0-6.5 | 5.0-6.6 | 5.0-6.6 | 8.0-12.0 |
| 4 | 1.0-1.65 | 1.5-2.2 | 3.0-4.0 | 4.5-8.25 | |
| 5 | 0.6-0.9 | 1.0-1.32 | 2.0-2.65 | 3.5-5.5 | |
| 6 | 0.4-0.7 | 0.6-0.9 | 1.0-1.65 | 2.2-4.5 | |
| 8 | 0.4-0.7 | 0.5-0.8 | 1.2-2.0 | ||
| 10 | 0.3-0.45 | 0.8-1.65 | |||
| 12 | 0.6-0.9 | ||||
| 14 | 0.3-0.66 |
| Ketebalan (mm) | IPG 6000W | IPG 8000W | IPG 10000W | IPG 12000W | IPG 15000W |
|---|---|---|---|---|---|
| Kecepatan | Kecepatan | Kecepatan | Kecepatan | Kecepatan | |
| (m/menit) | (m/menit) | (m/menit) | (m/menit) | (m/menit) | |
| 1 | 50.0-60.0 | 53.0-65.0 | 55.0-70.0 | 60.0-80.0 | 65.0-85.0 |
| 2 | 25.0-38.5 | 30.0-40.0 | 33.0-42.0 | 35.0-45.0 | 38.0-50.0 |
| 3 | 13.0-20.0 | 15.0-23.0 | 18.0-26.0 | 22.0-35.0 | 25.0-38.0 |
| 4 | 10.0-13.2 | 12.0-16.0 | 15.0-18.0 | 17.0-24.0 | 20.0-26.0 |
| 5 | 5.0-8.8 | 7.0-10 | 11.0-15.0 | 14.0-20.0 | 17.0-22.0 |
| 6 | 4.0-6.6 | 5.0-7.0 | 9.0-11.0 | 12.0-17.0 | 14.0-18.0 |
| 8 | 2.0-3.3 | 2.5-4.0 | 4.0-6.0 | 9.0-11.0 | 11.0-15.0 |
| 10 | 1.0-2.3 | 1.5-2.8 | 2.5-3.5 | 3.5-4.5 | 4.0-5.0 |
| 12 | 0.8-1.55 | 1.0-1.6 | 1.5-2.0 | 2.0-3.0 | 2.3-3.2 |
| 14 | 0.6-0.9 | 0.8-1.2 | 1.0-1.5 | 1.5-1.8 | 1.7-2.1 |
| 16 | 0.4-1.0 | 0.6-0.8 | 0.7-1.0 | 1.1-1.4 | 1.3-1.6 |
| 20 | 0.5-0.7 | 0.5-0.8 | 1.0-1.2 | 1.1-1.4 | |
| 25 | 0.3 | 0.5-0.7 | 0.7-1.0 | 1.0-1.2 | |
| 30 | 0.3-0.5 | 0.5-0.7 | 0.6-0.8 | ||
| 35 | 0.3 | 0.4-0.5 | 0.5-0.6 | ||
| 40 | 0.3 | 0.4-0.5 | |||
| 50 | 0.3 | 0.3 | |||
| 55 | 0.3 |
4. Grafik Ketebalan & Kecepatan Pemotongan Laser Serat (Kuningan)
| Ketebalan (mm) | IPG 1000W | IPG 1500W | IPG 2000W | IPG 3000W | IPG 4000W |
|---|---|---|---|---|---|
| Kecepatan | Kecepatan | Kecepatan | Kecepatan | Kecepatan | |
| (m/menit) | (m/menit) | (m/menit) | (m/menit) | (m/menit) | |
| 1 | 14.0-20.0 | 30.0-38.5 | 30.0-38.5 | 20.0-31.0 | 25.0-38.5 |
| 2 | 3.0-4.5 | 4.0-7.2 | 7.7-8.8 | 7.0-13.2 | 8.0-13.2 |
| 3 | 1.0-1.55 | 2.5-3.1 | 3.0-4.5 | 5.0-7.2 | 5.5-7.7 |
| 4 | 1.0-1.2 | 1.32-1.8 | 1.8-2.42 | 3.5-5.5 | |
| 5 | 0.6-0.9 | 0.6-0.9 | 1.0-1.65 | 2.0-3.52 | |
| 6 | 0.4-0.66 | 0.8-1.32 | 1.4-2.2 | ||
| 8 | 0.3-0.45 | 0.8-1.32 | |||
| 10 | 0.2-0.45 |
| Ketebalan (mm) | IPG 6000W | IPG 8000W | IPG 10000W | IPG 12000W | IPG 15000W |
|---|---|---|---|---|---|
| Kecepatan | Kecepatan | Kecepatan | Kecepatan | Kecepatan | |
| (m/menit) | (m/menit) | (m/menit) | (m/menit) | (m/menit) | |
| 1 | 45.0-55.0 | 48.0-60.0 | 50.0-62.0 | 55.0-65.0 | 60.0-75.0 |
| 2 | 25.0-33.0 | 27.0-32.0 | 30.0-35.0 | 32.0-40.0 | 35.0-45.0 |
| 3 | 12.0-20.0 | 13.0-20.0 | 15.0-21.0 | 16.0-22.0 | 18.0-25.0 |
| 4 | 8.0-11.0 | 10.0-12.0 | 11.0-13.0 | 12.0-15.0 | 14.0-18.0 |
| 5 | 6.0-7.7 | 7.0-9.0 | 8.0-11.0 | 10.0-14.0 | 12.0-16.0 |
| 6 | 3.5-50 | 4.0-5.5 | 5.0-7.5 | 8.0-13.0 | 10.0-13.0 |
| 8 | 1.6-2.42 | 2.0-2.5 | 3.0-4.5 | 5.5-6.5 | 7.0-8.5 |
| 10 | 0.8-1.32 | 1.6-2.2 | 2.0-2.5 | 3.5-4.7 | 5.0-6.5 |
| 12 | 0.8-1.2 | 1.1-2.0 | 1.7-2.8 | 2.0-3.5 | |
| 15 | 0.8-1.2 | 1.0-1.6 | 1.5-2.2 | ||
| 18 | 0.6-0.8 | 0.8-1.2 | |||
| 20 | 0.6-0.8 | 0.5-0.8 |
II. Grafik Ketebalan & Kecepatan Pemotongan Laser Serat berdasarkan Daya
Catatan: Parameter yang ditandai dengan warna merah dalam tabel adalah parameter pengambilan sampel, yang sangat dipengaruhi oleh berbagai faktor dalam pemrosesan aktual dan hanya dapat diterapkan dalam skenario terbatas. Produksi batch kecil tidak disarankan; sebaliknya, disarankan untuk menggunakan laser berdaya lebih tinggi untuk produksi dan pemrosesan massal.
Catatan: Untuk memotong baja karbon dengan ketebalan 1 atau 2 mm (yang dapat bervariasi, tergantung pada dayanya), dianjurkan untuk menggunakan udara atau gas nitrogen. Metode ini menawarkan kecepatan pemotongan yang lebih cepat dibandingkan dengan menggunakan oksigen, meskipun mungkin ada sedikit pembentukan terak.
1. Daya Laser 1000W
| 1000W | ||||||||
| Bahan | Ketebalan [mm] | Kecepatan [m/min] | Daya [W] | gas jenis | tekanan [bar] | nosel [mm] | Fokus [mm] | pemotongan tinggi [mm] |
| karbon baja | 0.8 | 18 | 1000 | N2/Air | 10 | 1.5S | 0 | 1 |
| 1 | 10 | 1000 | 10 | 1.5S | 0 | 1 | ||
| 2 | 4 | 1000 | O2 | 0.6 | 1.2D | +3 | 0.8 | |
| 3 | 3 | 1000 | 0.6 | 1.2D | +3 | 0.8 | ||
| 4 | 2.3 | 1000 | 0.6 | 1.2D | +3 | 0.8 | ||
| 5 | 1.8 | 1000 | 0.6 | 1.2D | +3 | 0.8 | ||
| 6 | 1.5 | 1000 | 0.6 | 1.5D | +3 | 0.8 | ||
| 8 | 1.1 | 1000 | 0.6 | 1.5D | +3 | 0.8 | ||
| 10 | 0.8 | 1000 | 0.6 | 2.5 | +3-+4 | 0.8 | ||
| tahan karat baja | 0.8 | 20 | 1000 | N2/Air | 12 | 1.5S | 0 | 0.8 |
| 1 | 13 | 12 | 1.5S | 0 | 0.5 | |||
| 2 | 6 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 3 | 12 | 3.0S | -1.5 | 0.5 | |||
| 4 | 1 | 14 | 3.0S | -2 | 0.5 | |||
| 5 | 0.6 | 16 | 3.5S | -2.5 | 0.5 | |||
| aluminium paduan | 0.8 | 18 | 1000 | N2 | 12 | 1.5S | 0 | 0.8 |
| 1 | 10 | 12 | 1.5S | 0 | 0.5 | |||
| 2 | 5 | 14 | 2.0S | -1 | 0.5 | |||
| 3 | 1.5 | 16 | 3.0S | -1.5 | 0.5 | |||
| kuningan | 1 | 9 | 1000 | N2 | 12 | 2.0S | 0 | 0.5 |
| 2 | 2 | 14 | 2.0S | -1 | 0.5 | |||
| 3 | 0.8 | 16 | 3.0S | -1.5 | 0.5 | |||
2. Daya Laser 1500W
| 1500W | ||||||||
| Bahan | Ketebalan [mm] | Kecepatan [m/min] | Daya [W] | gas jenis | tekanan [bar] | nosel [mm] | Fokus [mm] | pemotongan tinggi [mm] |
| karbon baja | 1 | 20 | 1500 | N2/Air | 10 | 1.5S | 0 | 1 |
| 2 | 5 | 1500 | O2 | 2 | 1.2D | 3 | 0.8 | |
| 3 | 3.6 | 0.6 | 1.2D | 3 | 0.8 | |||
| 4 | 2.5 | 0.6 | 1.2D | 3 | 0.8 | |||
| 5 | 1.8 | 0.6 | 1.2D | 3 | 0.8 | |||
| 6 | 1.4 | 0.6 | 1.5D | 3 | 0.8 | |||
| 8 | 1.2 | 0.6 | 1.5D | 3 | 0.8 | |||
| 10 | 1 | 0.6 | 2.0D | 2.5 | 0.8 | |||
| 12 | 0.8 | 0.6 | 2.5D | 2.5 | 0.8 | |||
| 14 | 0.65 | 0.6 | 3.0D | 2.5 | 0.8 | |||
| 16 | 0.5 | 0.6 | 3.0D | 2.5 | 0.8 | |||
| tahan karat baja | 1 | 20 | 1500 | N2 | 10 | 1.5S | 0 | 0.8 |
| 2 | 7 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 4.5 | 12 | 2.5S | -1.5 | 0.5 | |||
| 5 | 1.5 | 14 | 3.0S | -2.5 | 0.5 | |||
| 6 | 0.8 | 16 | 3.0S | -3 | 0.5 | |||
| aluminium paduan | 1 | 18 | 1500 | N2 | 12 | 1.5S | 0 | 0.5 |
| 2 | 6 | 14 | 2.0S | -1 | 0.5 | |||
| 3 | 2.5 | 14 | 2.5S | -1.5 | 0.5 | |||
| 4 | 0.8 | 16 | 3.0S | -2 | 0.5 | |||
| kuningan | 1 | 15 | 1500 | N2 | 12 | 1.5S | 0 | 0.5 |
| 2 | 5 | 14 | 2.0S | -1 | 0.5 | |||
| 3 | 1.8 | 14 | 2.5S | -1.5 | 0.5 | |||
3. Daya Laser 2000W
| 2000W | ||||||||
| Bahan | Ketebalan [mm] | Kecepatan [m/min] | Daya [W] | gas jenis | tekanan [bar] | nosel [mm] | Fokus [mm] | pemotongan tinggi [mm] |
| karbon baja | 1 | 25 | 2000 | N2/Air | 10 | 1.5S | 0 | 1 |
| 2 | 9 | 10 | 2.0S | -1 | 0.5 | |||
| 2 | 5.2 | 2000 | O2 | 1.6 | 1.0D | 3 | 0.8 | |
| 3 | 4.2 | 0.6 | 1.0D | 3 | 0.8 | |||
| 4 | 3 | 0.6 | 1.0D | 3 | 0.8 | |||
| 5 | 2.2 | 0.6 | 1.2D | 3 | 0.8 | |||
| 6 | 1.8 | 0.6 | 1.2D | 3 | 0.8 | |||
| 8 | 1.3 | 0.5 | 2.0D | 2.5 | 0.8 | |||
| 10 | 1.1 | 0.5 | 2.0D | 2.5 | 0.8 | |||
| 12 | 0.9 | 0.5 | 2.5D | 2.5 | 0.8 | |||
| 14 | 0.8 | 0.5 | 3.0D | 2.5 | 0.8 | |||
| 16 | 0.7 | 0.6 | 3.5D | 2.5 | 0.8 | |||
| 18 | 0.5 | 0.6 | 4.0D | 3 | 0.8 | |||
| tahan karat baja | 1 | 28 | 2000 | N2 | 10 | 1.5S | 0 | 0.8 |
| 2 | 10 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 5 | 12 | 2.0S | -1.5 | 0.5 | |||
| 4 | 3 | 14 | 2.5S | -2 | 0.5 | |||
| 5 | 2 | 14 | 3.0S | -2.5 | 0.5 | |||
| 6 | 1.5 | 14 | 3.0S | -3 | 0.5 | |||
| 8 | 0.6 | 16 | 3.0S | -4 | 0.5 | |||
| aluminium paduan | 1 | 20 | 2000 | N2 | 12 | 1.5S | 0 | 0.8 |
| 2 | 10 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 4 | 14 | 2.0S | -1.5 | 0.5 | |||
| 4 | 1.5 | 14 | 2.5S | -2 | 0.5 | |||
| 5 | 0.9 | 16 | 3.0S | -2.5 | 0.5 | |||
| 6 | 0.6 | 16 | 3.0S | -3 | 0.5 | |||
| kuningan | 1 | 18 | 2000 | N2 | 12 | 1.5S | 0 | 0.8 |
| 2 | 8 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 3 | 14 | 2.5S | -1.5 | 0.5 | |||
| 4 | 1.3 | 16 | 3.0S | -2 | 0.5 | |||
| 5 | 0.8 | 16 | 3.0S | -2.5 | 0.5 | |||
4. Daya Laser 3000W
| 3000W | ||||||||
| Bahan | Ketebalan [mm] | Kecepatan [m/min] | Daya [W] | gas jenis | tekanan [bar] | nosel [mm] | Fokus [mm] | pemotongan tinggi [mm] |
| baja karbon | 1 | 28-35 | 3000 | N2/Air | 10 | 1.5S | 0 | 1 |
| 2 | 16-20 | 3000 | 10 | 2.0S | 0 | 0.5 | ||
| 2 | 3.8-4.2 | 2100 | O2 | 1.6 | 1.0D | +3 | 0.8 | |
| 3 | 3.2-3.6 | 2100 | 0.6 | 1.0D | +4 | 0.8 | ||
| 4 | 3-3.2 | 2400 | 0.6 | 1.0D | +4 | 0.8 | ||
| 5 | 2.7-3 | 3000 | 0.6 | 1.2D | +4 | 0.8 | ||
| 6 | 2.2-2.5 | 3000 | 0.6 | 1.2D | +4 | 0.8 | ||
| 8 | 1.8-2.2 | 3000 | 0.6 | 1.2D | +4 | 0.8 | ||
| 10 | 1-1.3 | 3000 | 0.6 | 1.2D | +4 | 0.8 | ||
| 12 | 0.9-1 | 2400 | 0.6 | 3.0D | +4 | 0.8 | ||
| 14 | 0.8-0.9 | 2400 | 0.6 | 3.0D | +4 | 0.8 | ||
| 16 | 0.6-0.7 | 2400 | 0.6 | 3.5D | +4 | 0.8 | ||
| 18 | 0.5-0.6 | 2400 | 0.6 | 4.0D | +4 | 0.8 | ||
| 20 | 0.5-0.55 | 2400 | 0.6 | 4.0D | +4 | 0.8 | ||
| baja tahan karat | 1 | 28-35 | 3000 | N2 | 10 | 1.5S | 0 | 0.8 |
| 2 | 18-24 | 12 | 2.0S | 0 | 0.5 | |||
| 3 | 7-10 | 12 | 2.5S | -0.5 | 0.5 | |||
| 4 | 5-6.5 | 14 | 2.5S | -1.5 | 0.5 | |||
| 5 | 3-3.6 | 14 | 3.0S | -2.5 | 0.5 | |||
| 6 | 2-2.7 | 14 | 3.0S | -3 | 0.5 | |||
| 8 | 1-1.2 | 16 | 3.5S | -4.5 | 0.5 | |||
| 10 | 0.5-0.6 | 16 | 4.0S | -6 | 0.5 | |||
| aluminium paduan | 1 | 25-30 | 3000 | N2 | 12 | 1.5S | 0 | 0.8 |
| 2 | 15-18 | 12 | 2.0S | 0 | 0.5 | |||
| 3 | 7-8 | 14 | 2.0S | -1 | 0.5 | |||
| 4 | 5-6 | 14 | 2.5S | -2 | 0.5 | |||
| 5 | 2.5-3 | 16 | 3.0S | -3 | 0.5 | |||
| 6 | 1.5-2 | 16 | 3.0S | -3.5 | 0.5 | |||
| 8 | 0.6-0.7 | 16 | 3.5S | -4 | 0.5 | |||
| kuningan | 1 | 20-28 | 3000 | N2 | 12 | 1.5S | 0 | 0.8 |
| 2 | 10-15 | 12 | 2.0S | 0 | 0.5 | |||
| 3 | 5-6 | 14 | 2.5S | -1 | 0.5 | |||
| 4 | 2.5-3 | 14 | 3.0S | -2 | 0.5 | |||
| 5 | 1.8-2.2 | 14 | 3.0S | -2.5 | 0.5 | |||
| 6 | 0.8-1 | 16 | 3.0S | -3 | 0.5 | |||
5. Daya Laser 4000W
| 4000W | ||||||||
| Bahan | Ketebalan [mm] | Kecepatan [m/min] | Daya [W] | gas jenis | tekanan [bar] | nosel [mm] | Fokus [mm] | pemotongan tinggi [mm] |
| baja karbon | 1 | 28-35 | 4000 | N2/Air | 10 | 1.5S | 0 | 1 |
| 2 | 12-15 | 4000 | 10 | 2.0S | -1 | 0.5 | ||
| 3 | 8-12 | 4000 | 10 | 2.0S | -1.5 | 0.5 | ||
| 3 | 4-4.5 | 1800 | O2 | 0.6 | 1.2D | +3 | 0.8 | |
| 4 | 3-3.5 | 2400 | 0.6 | 1.2D | +3 | 0.8 | ||
| 5 | 2.5-3 | 2400 | 0.6 | 1.2D | +3 | 0.8 | ||
| 6 | 2.5-2.8 | 3000 | 0.6 | 1.2D | +3 | 0.8 | ||
| 8 | 2-2.3 | 3600 | 0.6 | 1.2D | +3 | 0.8 | ||
| 10 | 1.8-2 | 4000 | 0.6 | 1.2D | +3 | 0.8 | ||
| 12 | 1-1.2 | 1800-2200 | 0.5 | 3.0D | +2.5 | 0.8 | ||
| 14 | 0.9-1 | 1800-2200 | 0.5 | 3.5D | +2.5 | 0.8 | ||
| 16 | 0.7-0.9 | 2200-2600 | 0.5 | 3.5D | +2.5 | 0.8 | ||
| 18 | 0.6-0.7 | 2200-2600 | 0.5 | 4.0D | +2.5 | 0.8 | ||
| 20 | 0.55-0.65 | 2200-2600 | 0.5 | 4.0D | +3 | 0.8 | ||
| 22 | 0.5-0.6 | 2200-2800 | 0.5 | 4.5D | +3 | 0.8 | ||
| 25 | 0.5 | 2400-3000 | 0.5 | 5.0D | +3 | 0.8 | ||
| tahan karat baja | 1 | 30-40 | 4000 | N2 | 10 | 1.5S | 0 | 0.8 |
| 2 | 15-20 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 10-12 | 12 | 2.0S | -1.5 | 0.5 | |||
| 4 | 6-7 | 12 | 2.5S | -2 | 0.5 | |||
| 5 | 4-4.5 | 14 | 2.5S | -2.5 | 0.5 | |||
| 6 | 3-3.5 | 14 | 3.0S | -3 | 0.5 | |||
| 8 | 1.5-1.8 | 14 | 3.0S | -4 | 0.5 | |||
| 10 | 1-1.2 | 16 | 4.0S | -5 | 0.5 | |||
| 12 | 0.8 | 16 | 4.0S | -6 | 0.5 | |||
| aluminium paduan | 1 | 25-30 | 4000 | N2 | 12 | 1.5S | 0 | 0.6 |
| 2 | 16-20 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 10-13 | 14 | 2.0S | -1.5 | 0.5 | |||
| 4 | 6-7 | 14 | 2.5S | -2 | 0.5 | |||
| 5 | 4-5 | 14 | 2.5S | -2.5 | 0.5 | |||
| 6 | 2.5-3 | 16 | 3.0S | -3 | 0.5 | |||
| 8 | 1-1.3 | 16 | 3.0S | -4 | 0.5 | |||
| 10 | 0.8 | 16 | 3.5S | -5 | 0.5 | |||
| kuningan | 1 | 25-28 | 4000 | N2 | 12 | 1.5S | 0 | 0.6 |
| 2 | 12-15 | 12 | 1.5S | -1 | 0.6 | |||
| 3 | 7-8 | 14 | 2.0S | -1 | 0.6 | |||
| 4 | 4-5 | 14 | 2.5S | -2 | 0.5 | |||
| 5 | 2.5-3 | 14 | 3.0S | -2 | 0.5 | |||
| 6 | 2-2.5 | 16 | 3.0S | -2.5 | 0.5 | |||
| 8 | 0.8-1 | 16 | 3.0S | -4 | 0.5 | |||
6. Daya Laser 6000W
| 6000W | ||||||||
| Bahan | Ketebalan [mm] | Kecepatan [m/min] | Daya [W] | gas jenis | tekanan [bar] | nosel [mm] | Fokus [mm] | pemotongan tinggi [mm] |
| baja karbon | 1 | 35-45 | 6000 | N2/Air | 12 | 1.5S | 0 | 1 |
| 2 | 20-25 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 12-14 | 14 | 2.0S | -1.5 | 0.5 | |||
| 4 | 8-10 | 14 | 2.0S | -2 | 0.5 | |||
| 5 | 6-7 | 16 | 3.0S | -2.5 | 0.5 | |||
| 6 | 5-6 | 16 | 3.5S | -3 | 0.5 | |||
| 3 | 3.5-4.2 | 2400 | O2 | 0.6 | 1.2E | +3 | 0.8 | |
| 4 | 3.3-3.8 | 2400 | 0.6 | 1.2E | +3 | 0.8 | ||
| 5 | 3-3.6 | 3000 | 0.6 | 1.2E | +3 | 0.8 | ||
| 6 | 2.7-3.2 | 3300 | 0.6 | 1.2E | +3 | 0.8 | ||
| 8 | 2.2-2.5 | 4200 | 0.6 | 1.2E | +3 | 0.8 | ||
| 10 | 2.0-2.3 | 5500 | 0.6 | 1.2E | +4 | 0.8 | ||
| 12 | 0.9-1 | 2200 | 0.6 | 3.0D | +2.5 | 0.8 | ||
| 12 | 1.9-2.1 | 6000 | 0.6 | 1.2E | +5 | 0.8 | ||
| 14 | 0.8-0.9 | 2200 | 0.6 | 3.5D | +2.5 | 0.8 | ||
| 14 | 1.4-1.7 | 6000 | 0.6 | 1.4E | +5 | 1 | ||
| 16 | 0.8-0.9 | 2200 | 0.6 | 4.0D | +2.5 | 0.8 | ||
| 16 | 1.2-1.4 | 6000 | 0.6 | 1.4E | +6 | 1 | ||
| 18 | 0.65-0.75 | 2200 | 0.6 | 4.0D | +2.5 | 0.8 | ||
| 18 | 0.8 | 6000 | 0.6 | 1.6S | +12 | 0.3 | ||
| 20 | 05-0.6 | 2400 | 0.6 | 4.0D | +3 | 0.8 | ||
| 20 | 0.6-0.7 | 6000 | 0.6 | 1.6S | +13 | 0.3 | ||
| 22 | 0.45-0.5 | 2400 | 0.6 | 4.0D | +3 | 0.8 | ||
| 22 | 05-0.6 | 6000 | 0.6 | 1.6S | +13 | 0.3 | ||
| 25 | 0.5 | 2400 | 0.5 | 5.0D | +3 | 1 | ||
| 25 | 0.4-0.5 | 6000 | 0.6 | 1.8S | +14 | 0.3 | ||
| tahan karat baja | 1 | 40-50 | 6000 | N2 | 10 | 1.5S | 0 | 0.8 |
| 2 | 25-30 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 15-18 | 12 | 2.5S | -1.5 | 0.5 | |||
| 4 | 10-12 | 14 | 2.5S | -2 | 0.5 | |||
| 5 | 7-8 | 14 | 3.0S | -2.5 | 0.5 | |||
| 6 | 6-7 | 15 | 3.0S | -3 | 0.5 | |||
| 8 | 3.5-3.8 | 15 | 3.0S | -4 | 0.5 | |||
| 10 | 1.6-2 | 15 | 3.5S | -6 | 0.5 | |||
| 12 | 1-1.2 | 16 | 3.5S | -7.5 | 0.5 | |||
| 14 | 0.8-1 | 16 | 4.0S | -9 | 0.5 | |||
| 16 | 0.5-0.6 | 18 | 4.0S | -10.5 | 0.5 | |||
| 18 | 0.4-0.5 | 20 | 5.0S | -11 | 0.3 | |||
| 20 | 0.2-0.35 | 20 | 5.0S | -12 | 0.3 | |||
| aluminium paduan | 1 | 30-45 | 6000 | N2 | 12 | 1.5S | 0 | 1 |
| 2 | 20-25 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 14-16 | 14 | 2.5S | -1.5 | 0.5 | |||
| 4 | 8-10 | 14 | 2.5S | -2 | 0.5 | |||
| 5 | 5-6 | 14 | 3.0S | -3 | 0.5 | |||
| 6 | 3.5-4 | 16 | 3.0S | -3 | 0.5 | |||
| 8 | 1.5-2 | 16 | 3.0S | -4 | 0.5 | |||
| 10 | 1-1.2 | 18 | 3.5S | -4.5 | 0.5 | |||
| 12 | 0.6-0.7 | 18 | 4.0S | -5 | 0.5 | |||
| 14 | 0.4-0.6 | 18 | 4.0S | -5 | 0.3 | |||
| 16 | 0.3-0.4 | 20 | 5.0S | -8 | 0.3 | |||
| kuningan | 1 | 30-40 | 6000 | N2 | 12 | 1.5S | 0 | 1 |
| 2 | 18-20 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 12-14 | 14 | 2.5S | -1 | 0.5 | |||
| 4 | 8-9 | 14 | 3.0S | -1.5 | 0.5 | |||
| 5 | 5-5.5 | 14 | 3.0S | -2 | 0.5 | |||
| 6 | 3.2-3.8 | 16 | 3.0S | -2.5 | 0.5 | |||
| 8 | 1.5-1.8 | 16 | 3.5S | -3 | 0.5 | |||
| 10 | 0.8-1 | 16 | 3.5S | -3 | 0.5 | |||
| 12 | 0.6-0.7 | 18 | 4.0S | -4 | 0.3 | |||
| tembaga merah | 1 | 25-30 | 6000 | O2 | 14 | 2.0S | -0.5 | 1 |
| 2 | 15-18 | 14 | 2.0S | -1 | 0.5 | |||
| 3 | 8-10 | 12 | 2.0S | -2 | 0.5 | |||
| 4 | 5-6 | 12 | 2.0S | -2 | 0.5 | |||
| 5 | 3-4 | 10 | 2.5S | -3 | 0.5 | |||
| 6 | 1.5-2 | 10 | 2.5S | -3 | 0.5 | |||
7. Daya Laser 8000W
| 8000W | ||||||||
| Bahan | Ketebalan [mm] | Kecepatan [m/min] | Daya [W] | jenis gas | tekanan [bar] | nosel [mm] | Fokus [mm] | pemotongan tinggi [mm] |
| baja karbon | 1 | 40-50 | 8000 | N2/Air | 12 | 1.5S | 0 | 1 |
| 2 | 25-30 | 12 | 2.0S | 0 | 0.5 | |||
| 3 | 20-25 | 13 | 2.0S | -1 | 0.5 | |||
| 4 | 15-18 | 13 | 2.5S | -1.5 | 0.5 | |||
| 5 | 10-12 | 13 | 2.5S | -2 | 0.5 | |||
| 6 | 8-9 | 13 | 2.5S | -2 | 0.5 | |||
| 8 | 5-5.5 | 13 | 3.0S | -3 | 0.5 | |||
| 8 | 2.3-2.5 | 4000 | O2 | 0.6 | 1.2E | +4 | 0.8 | |
| 10 | 2.3 | 6000 | 0.6 | 1.2E | +6 | 0.8 | ||
| 12 | 1.8-2 | 7500 | 0.6 | 1.2E | +7 | 0.8 | ||
| 14 | 1.6-1.8 | 8000 | 0.6 | 1.4E | +8 | 0.8 | ||
| 16 | 1.4-1.6 | 0.6 | 1.4E | +9 | 0.8 | |||
| 20 | 1-1.2 | 0.6 | 1.6E | +9 | 0.8 | |||
| 22 | 0.6-0.65 | 0.7 | 1.8E | +9 | 0.8 | |||
| 25 | 0.3-0.45 | 0.7 | 1.8E | +10 | 0.8 | |||
| 30 | 0.2-0.25 | 1.3 | 1.8E | +11 | 1.2 | |||
| 40 | 0.1-0.15 | 1.5 | 1.8E | +11.5 | 1.2 | |||
| tahan karat baja | 1 | 40-50 | 8000 | N2 | 10 | 2.0S | 0 | 1 |
| 2 | 30-35 | 12 | 2.0S | 0 | 0.5 | |||
| 3 | 20-24 | 13 | 2.0S | 0 | 0.5 | |||
| 4 | 15-18 | 12 | 2.0S | -1 | 0.5 | |||
| 5 | 9-10 | 15 | 2.5S | -1 | 0.5 | |||
| 6 | 7-8 | 8 | 3.5B | -2 | 0.5 | |||
| 8 | 4-5 | 7 | 5.0B | -2 | 0.5 | |||
| 10 | 3-3.5 | 5 | 5.0B | -3 | 0.5 | |||
| 12 | 2-2.5 | 6 | 6.0B | -4 | 0.5 | |||
| 14 | 1.5-2 | 6 | 7.0B | -6 | 0.3 | |||
| 16 | 1-1.5 | 6 | 7.0B | -8 | 0.3 | |||
| 18 | 0.8-1 | 14 | 5.0B | -9 | 0.5 | |||
| 20 | 0.6-0.8 | 6 | 7.0B | -11 | 0.3 | |||
| 25 | 0.3-0.4 | 6 | 7.0B | -13 | 0.3 | |||
| 30 | 0.15-0.2 | 10 | 7.0B | +8 | 0.3 | |||
| tahan karat baja | 1 | 40-50 | 8000 | Udara | 10 | 2.0S | 0 | 1 |
| 2 | 30-35 | 10 | 2.5S | 0 | 0.5 | |||
| 3 | 22-25 | 10 | 2.5S | 0 | 0.5 | |||
| 4 | 14-16 | 10 | 3.5B | 0 | 0.5 | |||
| 5 | 9-10 | 10 | 3.5B | 0 | 0.5 | |||
| 6 | 7-8 | 10 | 3.5B | 0 | 0.5 | |||
| 8 | 5-5.5 | 10 | 3.5B | 0 | 0.5 | |||
| 10 | 3-3.5 | 10 | 3.5B | -1 | 0.5 | |||
| 12 | 2-2.5 | 10 | 5.0B | -4 | 0.5 | |||
| 14 | 1.5-2 | 10 | 5.0B | -6 | 0.5 | |||
| 16 | 0.8-1 | 10 | 5.0B | -8 | 0.5 | |||
| 18 | 0.7-0.8 | 10 | 5.0B | -9 | 0.5 | |||
| 20 | 0.6-0.7 | 10 | 5.0B | -11 | 0.3 | |||
| 25 | 04-0.5 | 10 | 5.0B | -13 | 0.3 | |||
| 30 | 0.2-0.25 | 10 | 5.0B | -15 | 0.3 | |||
| aluminium paduan | 1 | 40-45 | 8000 | N2 | 12 | 2.0S | 0 | 0.8 |
| 2 | 25-30 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 22-25 | 12 | 2.0S | -1 | 0.5 | |||
| 4 | 12-15 | 12 | 2.0S | -2 | 0.5 | |||
| 5 | 8-10 | 14 | 2.5S | -3 | 0.5 | |||
| 6 | 6-7 | 14 | 2.5S | -3 | 0.5 | |||
| 8 | 3.5-4 | 14 | 2.5S | -4 | 0.5 | |||
| 10 | 2-2.5 | 14 | 5.0B | -5 | 0.5 | |||
| 12 | 1.6-2 | 16 | 5.0B | -5 | 0.5 | |||
| 14 | 1-1.2 | 16 | 5.0B | -6 | 0.5 | |||
| 16 | 0.8-1 | 16 | 5.0B | -7 | 0.5 | |||
| 18 | 0.7-0.8 | 16 | 5.0B | -8 | 0.5 | |||
| 20 | 0.5-0.6 | 16 | 7.0B | -9 | 0.3 | |||
| 25 | 0.4-0.5 | 16 | 7.0B | -10 | 0.3 | |||
| 30 | 0.2 | 18 | 7.0B | +7 | 0.3 | |||
| kuningan | 1 | 30-40 | 8000 | N2 | 12 | 2.0S | 0 | 1 |
| 2 | 25-27 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 15-18 | 12 | 2.0S | -1 | 0.5 | |||
| 4 | 10-11 | 12 | 2.0S | -2 | 0.5 | |||
| 5 | 7-8 | 14 | 2.5S | -3 | 0.5 | |||
| 6 | 6-6.5 | 14 | 2.5S | -3 | 0.5 | |||
| 8 | 2.5-3 | 14 | 2.5S | -4 | 0.5 | |||
| 10 | 1-1.5 | 14 | 5.0B | -5 | 0.5 | |||
| 12 | 0.8-1 | 14 | 5.0B | -5 | 0.5 | |||
| 14 | 0.7-0.8 | 16 | 5.0B | -8 | 0.5 | |||
| 16 | 0.6 | 16 | 5.0B | -11 | 0.3 | |||
| tembaga merah | 1 | 25-30 | 8000 | O2 | 14 | 2.0S | -0.5 | 1 |
| 2 | 16-20 | 14 | 2.0S | -1 | 0.5 | |||
| 3 | 12-14 | 14 | 2.0S | -2 | 0.5 | |||
| 4 | 7-8 | 12 | 2.0S | -2 | 0.5 | |||
| 5 | 4-5 | 12 | 2.5S | -3 | 0.5 | |||
| 6 | 2.5-3 | 12 | 2.5S | -3 | 0.5 | |||
| 8 | 1-1.5 | 12 | 3.0S | -4 | 0.5 | |||
| 10 | 0.5-0.7 | 12 | 4.0S | -5 | 0.5 | |||
8. Daya Laser 12kW
| 12000W | ||||||||
| Bahan | Ketebalan [mm] | Kecepatan [m/min] | Daya [W] | jenis gas | tekanan [bar] | nosel [mm] | Fokus [mm] | pemotongan tinggi [mm] |
baja karbon | 1 | 50-60 | 12000 | N2/Air | 12 | 1.5S | 0 | 1 |
| 2 | 35-40 | 12 | 2.0S | 0 | 0.5 | |||
| 3 | 28-33 | 13 | 2.0S | 0 | 0.5 | |||
| 4 | 20-24 | 13 | 2.5S | 0 | 0.5 | |||
| 5 | 15-18 | 13 | 2.5S | 0 | 0.5 | |||
| 6 | 10-13 | 13 | 2.5S | 0 | 0.5 | |||
| 8 | 7-10 | 13 | 3.0S | -1.5 | 0.5 | |||
| 10 | 6-6.5 | 13 | 4.0S | -3 | 0.5 | |||
| baja karbon | 10 | 2-2.3 | 6000 | O₂ positif fokus | 0.6 | 1.2E | +6 | 0.8 |
| 12 | 1.8-2 | 7500 | 0.6 | 1.2E | +7 | 0.8 | ||
| 14 | 1.6-1.8 | 8500 | 0.6 | 1.4E | +7 | 0.8 | ||
| 16 | 1.5-1.6 | 9500 | 0.6 | 1.4E | +8 | 0.8 | ||
| 20 | 1.3-1.4 | 12000 | 0.6 | 1.6E | +8 | 0.8 | ||
| 22 | 0.9-1 | 0.7 | 1.8E | +9 | 0.8 | |||
| 22 | 1-1.2 | 0.7 | 1.4SP | +11 | 0.5 | |||
| 25 | 0.7-0.9 | 0.7 | 1.8E | +11 | 0.8 | |||
| 25 | 08-1 | 0.7 | 1.5SP | +12 | 0.5 | |||
| 30 | 0.4-0.5 | 1.3 | 1.8E | +11 | 1.2 | |||
| 30 | 0.7-0.8 | 0.8 | 1.5SP | +12 | 0.5 | |||
| 40 | 0.25-0.3 | 1.5 | 1.8E | +11.5 | 1.2 | |||
| baja karbon | 12 | 3-3.5 | 12000 | O₂ negatif fokus | 1 | 1.6SP | -10 | 1.5 |
| 14 | 3-3.2 | 1 | 1.6SP | -10 | 1.5 | |||
| 16 | 2.8-3 | 1 | 1.6SP | -12 | 1.5 | |||
| 20 | 2-2.3 | 1.2 | 1.6SP | -12 | 1.5 | |||
| 25 | 1.1-1.3 | 1.3 | 1.8SP | -14 | 1.5 | |||
| 30 | 0.9-1 | 1.4 | 1.8SP | -14 | 1.5 | |||
| baja tahan karat | 1 | 50-60 | 12000 | N2 | 10 | 2.0S | 0 | |
| 2 | 40-45 | 12 | 2.0S | 0 | 0.5 | |||
| 3 | 30-35 | 13 | 2.0S | 0 | 0.5 | |||
| 4 | 22-26 | 12 | 2.0S | 0 | 0.5 | |||
| 5 | 15-18 | 15 | 2.5S | 0 | 0.5 | |||
| 6 | 13-15 | 8 | 3.5B | 0 | 0.5 | |||
| 8 | 8-10 | 7 | 5.0B | 0 | 0.5 | |||
| 10 | 6.5-7.5 | 5 | 5.0B | -1 | 0.5 | |||
| 12 | 5-5.5 | 6 | 6.0B | -4 | 0.5 | |||
| 14 | 3-3.5 | 6 | 7.0B | -6 | 0.3 | |||
| 16 | 2-2.3 | 6 | 7.0B | -8 | 0.3 | |||
| 18 | 1.3-1.5 | 6 | 7.0B | -9 | 0.5 | |||
| 20 | 1.2-1.4 | 6 | 7.0B | -11 | 0.3 | |||
| 25 | 0.7-0.9 | 6 | 7.0B | -13 | 0.3 | |||
| 30 | 0.25-0.3 | 10 | 7.0B | +7 | 0.3 | |||
| 40 | 0.15-0.2 | 15 | 7.0B | +8 | 0.3 | |||
| baja tahan karat | 1 | 50-60 | 12000 | Udara | 10 | 2.0S | 0 | 1 |
| 2 | 40-45 | 10 | 2.5S | 0 | 0.5 | |||
| 3 | 30-35 | 10 | 2.5S | 0 | 0.5 | |||
| 4 | 22-28 | 10 | 3.5B | 0 | 0.5 | |||
| 5 | 16-19 | 10 | 3.5B | 0 | 0.5 | |||
| 6 | 14-17 | 10 | 3.5B | 0 | 0.5 | |||
| 8 | 9-11 | 10 | 3.5B | 0 | 0.5 | |||
| 10 | 7-8 | 10 | 3.5B | -1 | 0.5 | |||
| 12 | 5.5-6 | 10 | 5.0B | -4 | 0.5 | |||
| 14 | 3.5-4 | 10 | 5.0B | -6 | 0.5 | |||
| 16 | 2.2-2.4 | 10 | 5.0B | -8 | 0.5 | |||
| 18 | 1.3-1.6 | 10 | 5.0B | -9 | 0.5 | |||
| 20 | 12-1.5 | 10 | 5.0B | -11 | 0.3 | |||
| 25 | 0.7-1 | 10 | 5.0B | -13 | 0.3 | |||
| 30 | 0.3-0.4 | 10 | 5.0B | -14 | 0.3 | |||
| aluminium paduan | 1 | 45-50 | 12000 | N2 | 12 | 2.0S | 0 | 0.8 |
| 2 | 30-35 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 20-25 | 12 | 2.0S | -1 | 0.5 | |||
| 4 | 18-20 | 12 | 2.0S | -2 | 0.5 | |||
| 5 | 14-16 | 14 | 2.5S | -3 | 0.5 | |||
| 6 | 10-12 | 14 | 2.5S | -3 | 0.5 | |||
| 8 | 6-8 | 14 | 2.5S | -4 | 0.5 | |||
| 10 | 4-6 | 14 | 5.0B | -5 | 0.5 | |||
| 12 | 2-3 | 16 | 5.0B | -5 | 0.5 | |||
| 14 | 1.5-2.5 | 16 | 5.0B | -5 | 0.5 | |||
| 16 | 1.3-2 | 16 | 5.0B | -5 | 0.5 | |||
| 18 | 1-1.6 | 16 | 5.0B | -5 | 0.5 | |||
| 20 | 0.8-1.2 | 16 | 7.0B | -5 | 0.3 | |||
| 25 | 0.5-0.7 | 16 | 7.0B | -5 | 0.3 | |||
| 30 | 0.4-0.5 | 18 | 7.0B | +7 | 0.3 | |||
| 40 | 0.25-0.3 | 18 | 7.0B | +8 | 0.3 | |||
kuningan | 1 | 35-45 | 12000 | N2 | 12 | 2.0S | 0 | 1 |
| 2 | 30-35 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 18-22 | 12 | 2.0S | -1 | 0.5 | |||
| 4 | 15-18 | 12 | 2.0S | -2 | 0.5 | |||
| 5 | 12-15 | 14 | 2.5S | -3 | 0.5 | |||
| 6 | 8-10 | 14 | 2.5S | -3 | 0.5 | |||
| 8 | 5-7 | 14 | 2.5S | -4 | 0.5 | |||
| 10 | 4-5 | 14 | 5.0B | -5 | 0.5 | |||
| 12 | 1.8-2 | 14 | 5.0B | -5 | 0.5 | |||
| 14 | 1.2-1.4 | 16 | 5.0B | -8 | 0.5 | |||
| 16 | 0.8-1 | 16 | 5.0B | -11 | 0.3 | |||
| tembaga merah | 1 | 25-30 | 12000 | O2 | 5 | 2.0S | -0.5 | 1 |
| 2 | 20-25 | 5 | 2.0S | -1 | 0.5 | |||
| 3 | 16-18 | 6 | 2.0S | -2 | 0.5 | |||
| 4 | 10-12 | 8 | 2.0S | -3 | 0.5 | |||
| 5 | 6-8 | 8 | 2.5S | -4.5 | 0.5 | |||
| 6 | 4-5 | 8 | 2.5S | -5 | 0.5 | |||
| 8 | 2-2.5 | 10 | 3.0S | -6 | 0.5 | |||
| 10 | 1-1.2 | 12 | 4.0S | -8 | 0.5 | |||
9. Daya Laser 15kW
| 15000W | ||||||||
| Bahan | Ketebalan [mm] | Kecepatan [m/min] | Daya [W] | jenis gas | tekanan [bar] | nosel [mm] | Fokus [mm] | pemotongan tinggi [mm] |
| karbon baja | 1 | 50-60 | 15000 | N2/Air | 10 | 1.5S | 0 | 1 |
| 2 | 45-48 | 10 | 2.0S | 0 | 0.5 | |||
| 3 | 30-38 | 12 | 2.0S | 0 | 0.5 | |||
| 4 | 26-29 | 12 | 2.5S | 0 | 0.5 | |||
| 5 | 20-23 | 12 | 2.5S | 0 | 0.5 | |||
| 6 | 17-19 | 12 | 2.5S | 0 | 0.5 | |||
| 8 | 10-12 | 12 | 3.0S | -1 | 0.5 | |||
| 10 | 7-8 | 13 | 4.0S | -1 | 0.5 | |||
| 12 | 5-6 | 13 | 4.0S | -2 | 0.5 | |||
| 14 | 4.5-5.5 | 13 | 4.0S | -6 | 0.5 | |||
| 16 | 3-3.5 | 13 | 5.0B | -8 | 0.5 | |||
| karbon Baja | 10 | 2-2.3 | 6000 | O₂ positif fokus | 0.6 | 1.2E | +6 | 0.8 |
| 12 | 1.8-2 | 7500 | 0.6 | 1.2E | +7 | 0.8 | ||
| 14 | 1.6-1.8 | 8500 | 0.6 | 1.4E | +7 | 0.8 | ||
| 16 | 1.5-1.6 | 9500 | 0.6 | 1.4E | +8 | 0.8 | ||
| 20 | 1.3-1.4 | 12000 | 0.6 | 1.6E | +8 | 0.8 | ||
| 22 | 1-1.2 | 15000 | 0.7 | 1.8E | +9 | 0.8 | ||
| 22 | 1.2-1.3 | 0.7 | 1.4SP | +11 | 0.5 | |||
| 25 | 0.8-1 | 0.7 | 1.8E | +10 | 0.8 | |||
| 25 | 1.2-1.3 | 0.7 | 1.5SP | +12 | 0.5 | |||
| 30 | 0.6-0.7 | 0.8 | 1.8E | +11 | 1.2 | |||
| 30 | 0.75-0.85 | 0.8 | 1.5SP | +12 | 0.5 | |||
| 40 | 0.3-0.35 | 1.5 | 1.8E | +11.5 | 1.2 | |||
| 50 | 0.2-0.25 | 1.6 | 1.8E | +11.5 | 1.8 | |||
| 60 | 0.18-0.2 | 1.8 | 1.8E | +12 | 2 | |||
| karbon baja | 12 | 3.2-3.5 | 15000 | O₂ negatif fokus | 1 | 1.6SP | -10 | 1.5 |
| 14 | 3-3.2 | 1 | 1.6SP | -10 | 1.5 | |||
| 16 | 3-3.1 | 1 | 1.6SP | -12 | 1.5 | |||
| 20 | 2.5-2.8 | 1.2 | 1.6SP | -12 | 1.5 | |||
| 25 | 1.6-1.9 | 1.3 | 1.8SP | -14 | 1.5 | |||
| 30 | 1.2-1.3 | 1.4 | 1.8SP | -14 | 1.5 | |||
| 35 | 1-1.2 | 1.4 | 2.0SP | -15 | 1.5 | |||
| tahan karat Baja | 1 | 50-60 | 15000 | N2 | 10 | 2.0S | 0 | 1 |
| 2 | 45-50 | 12 | 2.0S | 0 | 0.5 | |||
| 3 | 35-38 | 13 | 2.5S | 0 | 0.5 | |||
| 4 | 25-29 | 12 | 2.5S | 0 | 0.5 | |||
| 5 | 18-22 | 15 | 2.5S | 0 | 0.5 | |||
| 6 | 15-18 | 8 | 3.5B | 0 | 0.5 | |||
| 8 | 10-12 | 7 | 5.0B | 0 | 0.5 | |||
| 10 | 8-9 | 5 | 5.0B | -1 | 0.5 | |||
| 12 | 6-7 | 6 | 6.0B | -4 | 0.5 | |||
| 14 | 4-4.2 | 6 | 7.0B | -6 | 0.3 | |||
| 16 | 2.6-2.8 | 6 | 7.0B | -8 | 0.3 | |||
| 18 | 2-2.3 | 6 | 7.0B | -9 | 0.5 | |||
| 20 | 1.8-2 | 6 | 7.0B | -11 | 0.3 | |||
| 25 | 1-1.2 | 6 | 7.0B | -13 | 0.3 | |||
| 30 | 0.6-0.7 | 10 | 5.0B | -15 | 0.3 | |||
| 40 | 0.3-0.4 | 15 | 7.0B | +8 | 0.3 | |||
| 50 | 0.2-0.25 | 15 | 8.0B | +9 | 0.3 | |||
| tahan karat baja | 1 | 50-60 | 15000 | Udara | 10 | 2.0S | 0 | 1 |
| 2 | 45-50 | 10 | 2.5S | 0 | 0.5 | |||
| 3 | 35-38 | 10 | 2.5S | 0 | 0.5 | |||
| 4 | 25-29 | 10 | 3.5B | 0 | 0.5 | |||
| 5 | 18-22 | 10 | 3.5B | 0 | 0.5 | |||
| 6 | 15-18 | 10 | 3.5B | 0 | 0.5 | |||
| 8 | 10-12 | 10 | 3.5B | 0 | 0.5 | |||
| 10 | 8-9 | 10 | 3.5B | -1 | 0.5 | |||
| 12 | 6-7 | 10 | 5.0B | -4 | 0.5 | |||
| 14 | 4-4.5 | 10 | 5.0B | -6 | 0.5 | |||
| 16 | 2.9-3.1 | 10 | 5.0B | -8 | 0.5 | |||
| 18 | 2.2-2.4 | 10 | 5.0B | -9 | 0.5 | |||
| 20 | 1.9-2.1 | 10 | 5.0B | -11 | 0.3 | |||
| 25 | 1.2-1.4 | 10 | 5.0B | -13 | 0.3 | |||
| 30 | 0.8-1 | 10 | 5.0B | -15 | 0.3 | |||
| 40 | 0.4-0.5 | 12 | 6.0B | -15 | 0.3 | |||
| 50 | 0.2-0.4 | 12 | 8.0B | -16 | 0.3 | |||
| aluminium paduan | 1 | 48-52 | 15000 | N2 | 12 | 2.0S | 0 | 0.8 |
| 2 | 35-38 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 25-27 | 12 | 2.0S | -1 | 0.5 | |||
| 4 | 20-22 | 12 | 2.0S | -2 | 0.5 | |||
| 5 | 15-17 | 14 | 2.5S | -3 | 0.5 | |||
| 6 | 12-14 | 14 | 2.5S | -3 | 0.5 | |||
| 8 | 8-9 | 14 | 2.5S | -4 | 0.5 | |||
| 10 | 5-7 | 14 | 5.0B | -5 | 0.5 | |||
| 12 | 2.5-3.5 | 16 | 5.0B | -5 | 0.5 | |||
| 14 | 2-3 | 16 | 5.0B | -5 | 0.5 | |||
| 16 | 1.5-2.5 | 16 | 5.0B | -5 | 0.5 | |||
| 18 | 1.3-1.8 | 16 | 5.0B | -5 | 0.5 | |||
| 20 | 0.8-12 | 18 | 7.0B | -5 | 0.3 | |||
| 25 | 0.5-0.7 | 18 | 7.0B | -5 | 0.3 | |||
| 30 | 0.4-0.5 | 20 | 7.0B | -7 | 0.3 | |||
| 40 | 0.25-0.3 | 20 | 7.0B | +8 | 0.3 | |||
| 50 | 0.2-0.25 | 20 | 8.0B | +9 | 0.3 | |||
| kuningan | 1 | 38-40 | 15000 | N2 | 12 | 2.0S | 0 | 1 |
| 2 | 32-37 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 20-24 | 12 | 2.0S | -1 | 0.5 | |||
| 4 | 16-19 | 12 | 2.0S | -2 | 0.5 | |||
| 5 | 13-16 | 14 | 2.5S | -3 | 0.5 | |||
| 6 | 9-11 | 14 | 2.5S | -3 | 0.5 | |||
| 8 | 6-8 | 14 | 2.5S | -4 | 0.5 | |||
| 10 | 5-6 | 14 | 5.0B | -5 | 0.5 | |||
| 12 | 2-2.2 | 14 | 5.0B | -5 | 0.5 | |||
| 14 | 1.4-1.6 | 16 | 5.0B | -8 | 0.5 | |||
| 16 | 1.2-1.3 | 18 | 5.0B | -11 | 0.5 | |||
| 18 | 1-1.2 | 18 | 5.0B | -11 | 0.5 | |||
| 20 | 0.6-0.7 | 18 | 6.0B | -12 | 0.3 | |||
| tembaga merah | 1 | 25-30 | 15000 | O2 | 5 | 2.0S | -0.5 | 1 |
| 2 | 20-25 | 5 | 2.0S | -1 | 0.5 | |||
| 3 | 18-20 | 6 | 2.0S | -2 | 0.5 | |||
| 4 | 12-14 | 8 | 2.0S | -3 | 0.5 | |||
| 5 | 8-9 | 8 | 2.5S | -4.5 | 0.5 | |||
| 6 | 6-7 | 8 | 2.5S | -5 | 0.5 | |||
| 8 | 2.5-3.5 | 10 | 3.0S | -6 | 0.5 | |||
| 10 | 1.5-2 | 12 | 4.0S | -8 | 0.5 | |||
10. Daya Laser 20kW
| 20000W | ||||||||
| Bahan | Ketebalan [mm] | Kecepatan [m/min] | Daya [W] | jenis gas | tekanan [bar] | nosel [mm] | Fokus [mm] | pemotongan tinggi [mm] |
| baja karbon | 1 | 50-60 | 12000 | N2/Air | 12 | 1.5S | 0 | 1 |
| 2 | 35-40 | 12 | 2.0S | 0 | 0.5 | |||
| 3 | 28-33 | 13 | 2.0S | 0 | 0.5 | |||
| 4 | 20-24 | 13 | 2.5S | 0 | 0.5 | |||
| 5 | 15-18 | 13 | 2.5S | 0 | 0.5 | |||
| 6 | 10-13 | 13 | 2.5S | 0 | 0.5 | |||
| 8 | 7-10 | 13 | 3.0S | -1.5 | 0.5 | |||
| 10 | 6-6.5 | 13 | 4.0S | -3 | 0.5 | |||
| baja karbon | 10 | 2-2.3 | 6000 | O₂ positif fokus | 0.6 | 1.2E | +6 | 0.8 |
| 12 | 1.8-2 | 7500 | 0.6 | 1.2E | +7 | 0.8 | ||
| 14 | 1.6-1.8 | 8500 | 0.6 | 1.4E | +7 | 0.8 | ||
| 16 | 1.5-1.6 | 9500 | 0.6 | 1.4E | +8 | 0.8 | ||
| 20 | 1.3-1.4 | 12000 | 0.6 | 1.6E | +8 | 0.8 | ||
| 22 | 0.9-1 | 0.7 | 1.8E | +9 | 0.8 | |||
| 22 | 1-1.2 | 0.7 | 1.4SP | +11 | 0.5 | |||
| 25 | 0.7-0.9 | 0.7 | 1.8E | +11 | 0.8 | |||
| 25 | 0.8-1 | 0.7 | 1.5SP | +12 | 0.5 | |||
| 30 | 0.4-0.5 | 1.3 | 1.8E | +11 | 1.2 | |||
| 30 | 0.7-0.8 | 0.8 | 1.5SP | +12 | 0.5 | |||
| 40 | 0.25-0.3 | 1.5 | 1.8E | +11.5 | 1.2 | |||
| baja karbon | 12 | 3-3.5 | 12000 | O₂ negatif fokus | 1 | 1.6SP | -10 | 1.5 |
| 14 | 3-3.2 | 1 | 1.6SP | -10 | 1.5 | |||
| 16 | 2.8-3 | 1 | 1.6SP | -12 | 1.5 | |||
| 20 | 2-2.3 | 1.2 | 1.6SP | -12 | 1.5 | |||
| 25 | 1.1-1.3 | 1.3 | 1.8SP | -14 | 1.5 | |||
| 30 | 0.9-1 | 1.4 | 1.8SP | -14 | 1.5 | |||
| baja tahan karat | 1 | 50-60 | 12000 | N2 | 10 | 2.0S | 0 | 1 |
| 2 | 40-45 | 12 | 2.0S | 0 | 0.5 | |||
| 3 | 30-35 | 13 | 2.0S | 0 | 0.5 | |||
| 4 | 22-26 | 12 | 2.0S | 0 | 0.5 | |||
| 5 | 15-18 | 15 | 2.5S | 0 | 0.5 | |||
| 6 | 13-15 | 8 | 3.5B | 0 | 0.5 | |||
| 8 | 8-10 | 7 | 5.0B | 0 | 0.5 | |||
| 10 | 6.5-7.5 | 5 | 5.0B | -1 | 0.5 | |||
| 12 | 5-5.5 | 6 | 6.0B | -4 | 0.5 | |||
| 14 | 3-3.5 | 6 | 7.0B | -6 | 0.3 | |||
| 16 | 2-2.3 | 6 | 7.0B | -8 | 0.3 | |||
| 18 | 1.3-1.5 | 6 | 7.0B | -9 | 0.5 | |||
| 20 | 1.2-1.4 | 6 | 7.0B | -11 | 0.3 | |||
| 25 | 0.7-0.9 | 6 | 7.0B | -13 | 0.3 | |||
| 30 | 0.25-0.3 | 10 | 7.0B | +7 | 0.3 | |||
| 40 | 0.15-0.2 | 15 | 7.0B | +8 | 0.3 | |||
| baja tahan karat | 1 | 50-60 | 12000 | Udara | 10 | 2.0S | 0 | 1 |
| 2 | 40-45 | 10 | 2.5S | 0 | 0.5 | |||
| 3 | 30-35 | 10 | 2.5S | 0 | 0.5 | |||
| 4 | 22-28 | 10 | 3.5B | 0 | 0.5 | |||
| 5 | 16-19 | 10 | 3.5B | 0 | 0.5 | |||
| 6 | 14-17 | 10 | 3.5B | 0 | 0.5 | |||
| 8 | 9-11 | 10 | 3.5B | 0 | 0.5 | |||
| 10 | 7-8 | 10 | 3.5B | -1 | 0.5 | |||
| 12 | 5.5-6 | 10 | 5.0B | -4 | 0.5 | |||
| 14 | 3.5-4 | 10 | 5.0B | -6 | 0.5 | |||
| 16 | 2.2-2.4 | 10 | 5.0B | -8 | 0.5 | |||
| 18 | 1.3-1.6 | 10 | 5.0B | -9 | 0.5 | |||
| 20 | 1.2-1.5 | 10 | 5.0B | -11 | 0.3 | |||
| 25 | 0.7-1 | 10 | 5.0B | -13 | 0.3 | |||
| 30 | 0.3-0.4 | 10 | 5.0B | -14 | 0.3 | |||
| aluminium paduan | 1 | 45-50 | 12000 | N2 | 12 | 2.0S | 0 | 0.8 |
| 2 | 30-35 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 20-25 | 12 | 2.0S | -1 | 0.5 | |||
| 4 | 18-20 | 12 | 2.0S | -2 | 0.5 | |||
| 5 | 14-16 | 14 | 2.5S | -3 | 0.5 | |||
| 6 | 10-12 | 14 | 2.5S | -3 | 0.5 | |||
| 8 | 6-8 | 14 | 2.5S | -4 | 0.5 | |||
| 10 | 4-6 | 14 | 5.0B | -5 | 0.5 | |||
| 12 | 2-3 | 16 | 5.0B | -5 | 0.5 | |||
| 14 | 1.5-2.5 | 16 | 5.0B | -5 | 0.5 | |||
| 16 | 1.3-2 | 16 | 5.0B | -5 | 0.5 | |||
| 18 | 1-1.6 | 16 | 5.0B | -5 | 0.5 | |||
| 20 | 0.8-1.2 | 16 | 7.0B | -5 | 0.3 | |||
| 25 | 0.5-0.7 | 16 | 7.0B | -5 | 0.3 | |||
| 30 | 0.4-0.5 | 18 | 7.0B | +7 | 0.3 | |||
| 40 | 0.25-0.3 | 18 | 7.0B | +8 | 0.3 | |||
| kuningan | 1 | 35-45 | 12000 | N2 | 12 | 2.0S | 0 | 1 |
| 2 | 30-35 | 12 | 2.0S | -1 | 0.5 | |||
| 3 | 18-22 | 12 | 2.0S | -1 | 0.5 | |||
| 4 | 15-18 | 12 | 2.0S | -2 | 0.5 | |||
| 5 | 12-15 | 14 | 2.5S | -3 | 0.5 | |||
| 6 | 8-10 | 14 | 2.5S | -3 | 0.5 | |||
| 8 | 5-7 | 14 | 2.5S | -4 | 0.5 | |||
| 10 | 4-5 | 14 | 5.0B | -5 | 0.5 | |||
| 12 | 1.8-2 | 14 | 5.0B | -5 | 0.5 | |||
| 14 | 1.2-1.4 | 16 | 5.0B | -8 | 0.5 | |||
| 16 | 0.8-1 | 16 | 5.0B | -11 | 0.3 | |||
| tembaga merah | 1 | 25-30 | 12000 | O2 | 5 | 2.0S | -0.5 | 1 |
| 2 | 20-25 | 5 | 2.0S | -1 | 0.5 | |||
| 3 | 16-18 | 6 | 2.0S | -2 | 0.5 | |||
| 4 | 10-12 | 8 | 2.0S | -3 | 0.5 | |||
| 5 | 6-8 | 8 | 2.5S | -4.5 | 0.5 | |||
| 6 | 4-5 | 8 | 2.5S | -5 | 0.5 | |||
| 8 | 2-2.5 | 10 | 3.0S | -6 | 0.5 | |||
| 10 | 1-1.2 | 12 | 4.0S | -8 | 0.5 | |||
11. Daya Laser 30kW
| 30000W | ||||||||
| Bahan | Ketebalan [mm] | Kecepatan [m/min] | Daya [W] | gas jenis | tekanan [bar] | nosel [mm] | Fokus [mm] | pemotongan tinggi [mm] |
| karbon baja | 5 | 22-30 | 30000 | N2/Air | 8 | 3.0S | 0 | 0.5 |
| 6 | 18-22 | 8 | 3.0S | -0.5 | 0.5 | |||
| 8 | 14-16 | 8 | 3.0S | -1 | 0.5 | |||
| 10 | 12-15 | 8 | 3.5S | -1.5 | 0.5 | |||
| 12 | 10-12 | 8 | 3.5S | -2 | 0.5 | |||
| 14 | 8-10 | 8 | 4.0S | -3 | 0.5 | |||
| 16 | 7-8 | 8 | 5.0S | -4 | 0.5 | |||
| 18 | 5.5-6 | 10 | 6.0S | -6 | 0.5 | |||
| 20 | 4.5-5.5 | 10 | 6.0S | -8 | 0.5 | |||
| 25 | 2.8-3.2 | 10 | 6.0S | -12 | 0.5 | |||
| karbon baja | 10 | 2-2.3 | 6000 | O₂ positif fokus | 0.6 | 1.2E | +8 | 0.8 |
| 12 | 1.8-2 | 7500 | 0.6 | 1.2E | +9 | 0.8 | ||
| 14 | 1.6-1.8 | 8500 | 0.6 | 1.4E | +10 | 0.8 | ||
| 16 | 1.6-1.8 | 9500 | 0.6 | 1.4E | +11 | 0.8 | ||
| 20 | 1.5-1.6 | 12000 | 0.6 | 1.6E | +12 | 0.8 | ||
| 22 | 1.4-1.5 | 18000 | 0.7 | 1.4SP | +13 | 0.5 | ||
| 25 | 1.2-1.4 | 18000 | 1.0 | 1.5SP | +13 | 0.4 | ||
| 30 | 1.2-1.3 | 19000 | 1.2 | 1.5SP | +13.5 | 0.4 | ||
| 40 | 0.6-0.9 | 20000 | 1.4 | 1.6SP | +14 | 0.4 | ||
| 40 (bukan Q235) 40 (bukan Q235) | 0.3-0.6 | 20000 | 1.6 | 1.8E | +13 | 2 | ||
| 50 (bukan Q235) 50 (bukan Q235) | 0.3-0.5 | 20000 | 1.6 | 1.8E | +13 | 2 | ||
| 50 | 0.6-0.8 | 30000 | 1.6 | 1.8SP | +14 | 0.4 | ||
| 60 | 0.2-0.25 | 1.6 | 1.8E | +13.5 | 2 | |||
| 70 | 0.18-0.2 | 1.7 | 1.8E | +13.5 | 2 | |||
| 80 | 0.12-0.15 | 1.8 | 1.8E | +14 | 2 | |||
| karbon baja | 12 | 3.2-3.5 | 30000 | O₂ negatif fokus | 1 | 1.6SP | -10 | 1.5 |
| 14 | 3-3.2 | 1 | 1.6SP | -10 | 1.5 | |||
| 16 | 3-3.1 | 1 | 1.6SP | -12 | 1.5 | |||
| 20 | 2.8-3 | 1.2 | 1.6SP | -12 | 1.5 | |||
| 25 | 2.6-2.8 | 1.3 | 1.8SP | -14 | 1.5 | |||
| 30 | 2.2-2.6 | 1.4 | 1.8SP | -14 | 1.5 | |||
| 35 | 1.4-1.6 | 1.4 | 2.0SP | -15 | 1.5 | |||
| 40 | 1-1.4 | 1.5 | 2.5S | -15 | 1.5 | |||
| 45 | 0.8-0.9 | 1.6 | 2.5S | -17 | 1.5 | |||
| tahan karat baja | 1 | 50-60 | 12000 | N2 | 8 | 2.0S | 0 | 1 |
| 2 | 50-60 | 8 | 2.0S | 0 | 0.5 | |||
| 3 | 40-50 | 30000 | 8 | 2.5S | 0 | 0.5 | ||
| 4 | 35-40 | 8 | 2.5S | 0 | 0.5 | |||
| 5 | 25-30 | 8 | 3.0S | 0 | 0.5 | |||
| 6 | 22-25 | 8 | 3.5B | 0 | 0.5 | |||
| 8 | 18-22 | 8 | 5.0B | -1 | 0.5 | |||
| 10 | 13-16 | 8 | 5.0B | -1.5 | 0.3 | |||
| 12 | 10-12 | 8 | 6.0B | -2 | 0.5 | |||
| 14 | 8-10 | 8 | 6.0B | -4 | 0.3 | |||
| 16 | 7-8 | 8 | 6.0B | -5 | 0.3 | |||
| 18 | 6-7 | 8 | 6.0B | -6 | 0.3 | |||
| 20 | 4-5 | 12 | 6.0B | -7.5 | 0.3 | |||
| 25 | 2-2.5 | 12 | 7.0B | -12 | 0.3 | |||
| 30 | 1.2-2 | 12 | 7.0B | -16 | 0.3 | |||
| 40 | 0.6-0.8 | 16 | 7.0B | -16 | 0.3 | |||
| 50 | 0.2-0.3 | 16 | 8.0B | +11 | 0.3 | |||
| 60 | 0.15-0.2 | 20 | 8.0B | +11 | 0.3 | |||
| 70 | 0.1-0.13 | 20 | 8.0B | +11 | 0.3 | |||
| 80 | 0.08-0.1 | 20 | 8.0B | +11 | 0.3 | |||
| 90 | 0.05-0.06 | 20 | 8.0B | +11 | 0.3 | |||
| 100 | 0.04-0.05 | 20 | 8.0B | +11 | 0.3 | |||
| tahan karat Stee | 1 | 50-60 | 12000 | Udara | 8 | 2.0S | 0 | 1 |
| 2 | 50-60 | 8 | 2.5S | 0 | 0.5 | |||
| 3 | 40-50 | 30000 | 8 | 2.5S | 0 | 0.5 | ||
| 4 | 35-40 | 8 | 3.5B | 0 | 0.5 | |||
| 5 | 25-30 | 8 | 3.5B | 0 | 0.5 | |||
| 6 | 22-25 | 8 | 3.5B | 0 | 0.5 | |||
| 8 | 18-22 | 10 | 3.5B | 0 | 0.5 | |||
| 10 | 14-18 | 10 | 3.5B | -1.5 | 0.3 | |||
| 12 | 12-14 | 10 | 5.0B | -4 | 0.3 | |||
| 14 | 10-12 | 10 | 5.0B | -6 | 0.3 | |||
| 16 | 8-9 | 10 | 5.0B | -7 | 0.3 | |||
| 18 | 6-7 | 10 | 5.0B | -8 | 0.3 | |||
| 20 | 5-6 | 10 | 5.0B | -9 | 0.3 | |||
| 25 | 2.5-3 | 10 | 5.0B | -13 | 0.3 | |||
| 30 | 1.5-2 | 10 | 5.0B | -17 | 0.3 | |||
| 40 | 0.8-1 | 16 | 7.0B | -16 | 0.3 | |||
| 50 | 0.2-0.3 | 16 | 8.0B | -18 | 0.3 | |||
| 60 | 0.15-0.2 | 20 | 8.0B | -20 | 0.3 | |||
| 70 | 0.1-0.13 | 20 | 8.0B | -25 | 0.3 | |||
| aluminium paduan | 1 | 55-60 | 12000 | N2 | 8 | 2.0S | 0 | 0.8 |
| 2 | 40-45 | 8 | 2.0S | -1 | 0.5 | |||
| 3 | 30-35 | 30000 | 10 | 2.5S | -1 | 0.5 | ||
| 4 | 25-30 | 12 | 2.5S | -2 | 0.5 | |||
| 5 | 18-25 | 14 | 3.0S | -3 | 0.5 | |||
| 6 | 18-20 | 14 | 3.0S | -3 | 0.5 | |||
| 8 | 15-18 | 14 | 3.5S | -4 | 0.5 | |||
| 10 | 12-15 | 14 | 3.5S | -5 | 0.5 | |||
| 12 | 10-12 | 16 | 5.0B | -6 | 0.3 | |||
| 14 | 8-10 | 16 | 5.0B | -7 | 0.3 | |||
| 16 | 6-8 | 16 | 5.0B | -7 | 0.3 | |||
| 18 | 3-4 | 16 | 5.0B | -7 | 0.3 | |||
| 20 | 2-3 | 18 | 6.0B | -7 | 0.3 | |||
| 25 | 1.5-2 | 18 | 6.0B | -7.5 | 0.3 | |||
| 30 | 0.8-1 | 20 | 7.0B | -7.5 | 0.3 | |||
| 40 | 0.5-0.8 | 20 | 7.0B | -9 | 0.3 | |||
| 50 | 0.4-0.6 | 20 | 8.0B | -9 | 0.3 | |||
| 60 | 0.2-0.3 | 20 | 8.0B | -9 | 0.3 | |||
| kuningan | 1 | 40-45 | 12000 | N2 | 12 | 2.0S | 0 | 1 |
| 2 | 35-40 | 30000 | 12 | 2.0S | 0 | 0.5 | ||
| 3 | 28-30 | 12 | 2.0S | 0 | 0.5 | |||
| 4 | 20-25 | 12 | 2.5S | 0 | 0.5 | |||
| 5 | 18-20 | 14 | 2.5S | 0 | 0.5 | |||
| 6 | 15-18 | 14 | 3.0S | 0 | 0.5 | |||
| 8 | 10-15 | 14 | 3.0S | 0 | 0.5 | |||
| 10 | 8-10 | 14 | 5.0B | -1 | 0.3 | |||
| 12 | 5-8 | 14 | 5.0B | -2 | 0.3 | |||
| 14 | 3-5 | 16 | 5.0B | -3 | 0.3 | |||
| 16 | 1.5-2 | 18 | 5.0B | -3 | 0.3 | |||
| 18 | 1.2-1.5 | 18 | 5.0B | -4 | 0.3 | |||
| 20 | 0.8-1 | 18 | 6.0B | -5 | 0.3 | |||
| merah tembaga | 1 | 25-30 | 30000 | O2 | 5 | 2.0S | 0 | 1 |
| 2 | 25-30 | 5 | 2.0S | 0 | 0.5 | |||
| 3 | 20-25 | 6 | 2.0S | 0 | 0.5 | |||
| 4 | 18-20 | 8 | 2.5S | -1 | 0.5 | |||
| 5 | 15-18 | 8 | 2.5S | -1 | 0.5 | |||
| 6 | 10-15 | 8 | 3.0S | -2 | 0.5 | |||
| 8 | 6-10 | 10 | 3.0S | -3 | 0.5 | |||
| 10 | 2-3.5 | 12 | 3.5S | -4 | 0.5 | |||
| 12 | 2-2.5 | 12 | 3.5S | -5 | 0.5 | |||
| 14 | 1.5-2 | 12 | 3.5S | -6 | 0.5 | |||
12. Daya Laser 40kW
| 40000W | ||||||||
| Bahan | Ketebalan [mm] | Kecepatan [m/min] | Daya [W] | gas jenis | tekanan [bar] | nosel [mm] | Fokus [mm] | pemotongan tinggi [mm] |
| karbon baja | 5 | 28-32 | 40000 | N2/Air | 8 | 3.0B | 0 | 0.3 |
| 6 | 25-28 | 8 | 3.0B | 0 | 0.3 | |||
| 8 | 22-24 | 8 | 3.0B | 0 | 0.3 | |||
| 10 | 16-20 | 8 | 3.5B | -0.5 | 0.3 | |||
| 12 | 14-17 | 8 | 3.5B | -0.5 | 0.3 | |||
| 14 | 11-13 | 8 | 5.0B | -1 | 0.3 | |||
| 16 | 8-9.5 | 8 | 5.0B | -1 | 0.3 | |||
| 18 | 8-8.5 | 8 | 6.0B | -2 | 0.3 | |||
| 20 | 7-8 | 8 | 6.0B | -3 | 0.3 | |||
| 25 | 5-5.5 | 6 | 8.0B | -5 | 0.3 | |||
| 30 | 3-4 | 6 | 8.0B | -7 | 0.3 | |||
| 40 | 1.5-2 | 4 | 10.0ECU | -13 | 0.3 | |||
| 50 | 0.7-1 | 4 | 10.0ECU | -20 | 0.3 | |||
| karbon baja | 10 | 2-2.3 | 6000 | O₂ positif fokus | 0.6 | 1.2E | +11 | 0.8 |
| 12 | 1.8-2 | 7500 | 0.6 | 1.2E | +12 | 0.8 | ||
| 14 | 1.6-1.8 | 8500 | 0.6 | 1.4E | +13 | 0.8 | ||
| 16 | 1.6-1.8 | 9500 | 0.6 | 1.4E | +14 | 0.8 | ||
| 20 | 1.5-1.6 | 12000 | 0.6 | 1.6E | +15 | 0.8 | ||
| 22 | 1.4-1.5 | 18000 | 0.7 | 1.4SP | +17 | 0.5 | ||
| 25 | 1.2-1.4 | 18000 | 0.65 | 1.6SP | +19 | 0.3 | ||
| 30 | 1.2-1.3 | 18000 | 0.6 | 1.8SP | +23 | 0.3 | ||
| 40 | 0.9-1.1 | 26000 | 0.8 | 2.2SP | +25 | 0.3 | ||
| 40 (bukan Q235) | 0.3-0.6 | 20000 | 1.6 | 1.8E | +18 | 2 | ||
| 50 (bukan Q235) | 0.3-0.5 | 25000 | 1.6 | 1.8E | +18 | 2 | ||
| 50 | 0.8-1 | 40000 | 1.2 | 2.2SP | +25 | 0.3 | ||
| 60 | 0.6-0.g | 1.5 | 2.4SP | +25 | 0.3 | |||
| 70 | 0.5-0.7 | 1.5 | 2.4SP | +25 | 0.3 | |||
| 80 | 04-0.6 | 1.6 | 2.5SP | +27 | 0.3 | |||
| 90 | 0.3-0.4 | 1.6 | 2.5SP | +28 | 0.3 | |||
| 100 | 0.2-0.3 | 1.6 | 2.5SP | +29 | 0.3 | |||
| karbon baja | 12 | 3.2-3.5 | 20000 | O₂ negatif fokus | 1 | 1.6SP | -9 | 1.5 |
| 14 | 3-3.2 | 1 | 1.6SP | -10 | 1.5 | |||
| 16 | 3-3.1 | 1 | 1.6SP | -10 | 1.5 | |||
| 20 | 2.8-3.2 | 1 | 1.8SP | -11 | 1.5 | |||
| 25 | 2.4-2.8 | 40000 | 1 | 2.5SP | -17 | 2.5 | ||
| 30 | 2.4-2.6 | 1.2 | 2.5SP | -18 | 1.5 | |||
| 35 | 2.3-2.6 | 1.3 | 2.5SP | -20 | 1.5 | |||
| 40 | 2-2.3 | 1.5 | 3.0SS | -23 | 1.5 | |||
| 50 | 1.2-1.6 | 1.6 | 3.0SS | -25 | 1.5 | |||
| 60 | 1-1.3 | 1.8 | 3.0SS | -27 | 3 | |||
| 70 | 0.6-0.8 | 2.0 | 3.0SS | -34 | 3 | |||
| tahan karat baja | 5 | 25-30 | 40000 | N2 | 8 | 3.0S | 0 | 0.3 |
| 6 | 22-25 | 8 | 3.5B | 0 | 0.3 | |||
| 8 | 20-23 | 8 | 5.0B | -0.5 | 0.3 | |||
| 10 | 16-21 | 8 | 5.0B | -0.5 | 0.3 | |||
| 12 | 12-14 | 8 | 6.0B | -1 | 0.3 | |||
| 14 | 10-12 | 8 | 6.0B | -1 | 0.3 | |||
| 16 | 9-11 | 8 | 6.0B | -2 | 0.3 | |||
| 18 | 8-9.5 | 8 | 6.0B | -3 | 0.3 | |||
| 20 | 7-8.5 | 8 | 6.0B | -5 | 0.3 | |||
| 25 | 4.5-5.5 | 8 | 7.0B | -7 | 0.3 | |||
| 30 | 3-4 | 8 | 7.0B | -13 | 0.3 | |||
| 40 | 1.5-2 | 8 | 7.0B | -20 | 0.3 | |||
| 50 | 0.5-0.8 | 6 | 8.0B | -38 | 0.3 | |||
| 60 | 0.4-0.6 | 6 | 8.0B | -38 | 0.3 | |||
| 70 | 0.2-0.3 | 6 | 8.0B | -40 | 0.3 | |||
| 80 | 0.2-0.25 | 20 | 10.0ECU | +11 | 0.3 | |||
| 90 | 0.14-0.18 | 20 | 10.0ECU | +12 | 0.3 | |||
| 100 | 0.08-0.12 | 20 | 10.0ECU | +12 | 0.3 | |||
| tahan karat baja | 5 | 30-34 | 40000 | Udara | 8 | 3.5B | 0 | 0.5 |
| 6 | 25-30 | 8 | 3.5B | 0 | 0.5 | |||
| 8 | 22-25 | 8 | 3.5B | 0 | 0.5 | |||
| 10 | 17-23 | 8 | 3.5B | -1.5 | 0.3 | |||
| 12 | 13-16 | 8 | 5.0B | -4 | 0.3 | |||
| 14 | 12-14 | 8 | 5.0B | -6 | 0.3 | |||
| 16 | 9-11.5 | 8 | 5.0B | -7 | 0.3 | |||
| 18 | 8-10 | 8 | 5.0B | -8 | 0.3 | |||
| 20 | 7-9 | 8 | 5.0B | -9 | 0.3 | |||
| 25 | 5-5.5 | 8 | 5.0B | -13 | 0.3 | |||
| 30 | 3.5-4.5 | 8 | 5.0B | -15 | 0.3 | |||
| 40 | 1.7-2.2 | 6 | 7.0B | -22 | 0.3 | |||
| 50 | 0.7-1 | 6 | 8.0B | -38 | 0.3 | |||
| 60 | 0.4-0.6 | 5 | 8.0B | -38 | 0.3 | |||
| 70 | 0.3-0.4 | 5 | 8.0B | -44 | 0.3 | |||
| 80 | 0.25-0.3 | 5 | 10.0ECU | -44 | 0.3 | |||
| 90 | 0.2-0.25 | 5 | 10.0ECU | -44 | 0.3 | |||
| 100 | 0.15-02 | 5 | 10.0ECU | -47 | 0.3 | |||
| aluminium paduan | 5 | 25-30 | 40000 | N2 | 8 | 3.0S | 0 | 0.3 |
| 6 | 20-25 | 8 | 3.5B | 0 | 0.3 | |||
| 8 | 18-22 | 10 | 5.0B | 0 | 0.3 | |||
| 10 | 14-17 | 12 | 5.0B | 0 | 0.3 | |||
| 12 | 11-13 | 14 | 6.0B | -1 | 0.3 | |||
| 14 | 9-11 | 14 | 6.0B | -1 | 0.3 | |||
| 16 | 7-9 | 14 | 6.0B | -2 | 0.3 | |||
| 18 | 5-7 | 14 | 6.0B | -3 | 0.3 | |||
| 20 | 4-5 | 16 | 6.0B | -5 | 0.3 | |||
| 25 | 3-3.5 | 16 | 7.0B | -7 | 0.3 | |||
| 30 | 2-3 | 16 | 7.0B | -9 | 0.3 | |||
| 40 | 1-1.5 | 16 | 7.0B | -9 | 0.3 | |||
| 50 | 0.4-0.6 | 18 | 8.0B | -11 | 0.3 | |||
| 60 | 0.2-0.3 | 18 | 8.0B | -11 | 0.3 | |||
| 70 | 0.2-0.25 | 20 | 8.0B | -11 | 0.3 | |||
| 80 | 0.15-0.2 | 20 | 10.0ECU | +11 | 0.3 | |||
| 90 | 0.12-0.15 | 20 | 10.0ECU | +12 | 0.3 | |||
| 100 | 0.08-0.1 | 20 | 10.0ECU | +12 | 0.3 | |||
| kuningan | 5 | 25-30 | 40000 | N2 | 14 | 2.5S | 0 | 0.5 |
| 6 | 20-25 | 14 | 3.0S | 0 | 0.5 | |||
| 8 | 18-22 | 14 | 3.0S | 0 | 0.5 | |||
| 10 | 10-14 | 14 | 5.0B | -1 | 0.3 | |||
| 12 | 8-11 | 14 | 5.0B | -2 | 0.3 | |||
| 14 | 6-8 | 16 | 5.0B | -3 | 0.3 | |||
| 16 | 5-7 | 18 | 5.0B | -3 | 0.3 | |||
| 18 | 4-5 | 18 | 5.0B | -4 | 0.3 | |||
| 20 | 3-4 | 18 | 6.0B | -5 | 0.3 | |||
| 25 | 2.5-3 | 18 | 6.0B | -7 | 0.3 | |||
| 30 | 2-2.5 | 18 | 6.0B | -7 | 0.3 | |||
| merah tembaga | 3 | 20-25 | 40000 | O2 | 6 | 2.0S | 0 | 0.5 |
| 4 | 18-20 | 8 | 2.5S | -1 | 0.5 | |||
| 5 | 15-18 | 8 | 2.5S | -1 | 0.5 | |||
| 6 | 10-15 | 8 | 3.0S | -2 | 0.5 | |||
| 8 | 6-10 | 10 | 3.0S | -3 | 0.5 | |||
| 10 | 2-3.5 | 12 | 3.5S | -4 | 0.5 | |||
| 12 | 2-2.5 | 12 | 3.5S | -5 | 0.5 | |||
| 14 | 1.5-2 | 12 | 3.5S | -6 | 0.5 | |||
| 16 | 1-1.5 | 12 | 4.0S | -6 | 0.5 | |||
| 20 | 0.6-1 | 12 | 4.0S | -8 | 0.5 | |||
III. Dasar-dasar Pemotongan Laser Serat
Serat pemotongan laser adalah proses fabrikasi presisi yang memanfaatkan sinar laser intensitas tinggi untuk memotong bahan. Sangat penting bagi seseorang untuk memahami karakteristik sumber laser dan bagaimana bahan yang berbeda berinteraksi dengan teknologi ini.
Sumber Laser dan Panjang Gelombang
Sumber dan panjang gelombang laser serat sangat penting dalam menentukan kemampuan pemotongan dan kualitas hasil akhir. Biasanya, laser serat beroperasi pada panjang gelombang sekitar 1,06 mikrometer, memungkinkan sinar yang sangat terfokus dengan penyerapan yang meningkat logam. Panjang gelombang adalah properti intrinsik yang memengaruhi interaksi dengan berbagai material, yang berdampak pada efisiensi dan kecepatan pemotongan.
Jenis dan Kompatibilitas Bahan
Laser serat sangat kompatibel dengan berbagai bahan logam, termasuk:
- Baja karbon
- Baja tahan karat
- Aluminium
- Tembaga
Kompatibilitas antara laser dan bahan menentukan ketebalan maksimum bahan yang dapat dipotong secara tepat, serta kecepatan pemotongan. Bahan yang berbeda memerlukan pengaturan khusus untuk mencapai pemotongan yang optimal, yang tercermin dalam grafik ketebalan dan kecepatan untuk pemotongan laser serat. Bagan ini merupakan sumber daya penting bagi operator untuk memaksimalkan kinerja dan presisi dalam proses pemotongan.
IV. Faktor-faktor yang Mempengaruhi Kecepatan Pemotongan
Jenis Bahan: Bahan yang berbeda menyerap energi laser pada tingkat yang berbeda-beda, yang mempengaruhi kecepatan pemotongan. Logam dengan reflektifitas yang lebih tinggi, seperti aluminium dan tembaga, biasanya memerlukan kecepatan yang lebih rendah.
Kekuatan Laser: Laser dengan daya yang lebih tinggi dapat memotong bahan yang lebih tebal dengan kecepatan yang lebih cepat. Sebagai contoh, laser 500W dapat memotong baja 1mm dengan kecepatan 10 m/menit, sedangkan laser 3kW dapat mencapai 35 m/menit untuk bahan dan ketebalan yang sama.
Posisi Fokus: Sinar laser harus difokuskan secara tepat. Jika tidak disesuaikan dengan benar, kecepatan pemotongan bisa menurun, sehingga berdampak pada kualitas tepi.
Gas Bantuan: Jenis dan tekanan gas bantu, seperti oksigen, nitrogen, atau udara, memengaruhi kecepatan potong dan kualitas mata potong.
Bahasa Indonesia 
English 
العربية 
Deutsch 
Español 
Français 
Italiano 
日本語 
한국어 
Nederlands 
Português 
Português do Brasil 
Русский 
Polski 
Türkçe